Empty DIN-Rail Interface Supports
  EMPTY INTERFACE SUPPORTS
 Home
 Technical Support
 Get a Sample
 Get Quotation
 Account
 Order Form
 E-Mail Us
 Tel 866-603-7701
 Fax412-220-9247
 

 DIN-Rail Mount Open PCB Supports
  Features:
  • Suitable for 72mm and 107mm wide PCBs
  • Modular snap-together or extruded versions
  • Snap-on DIN-Rail mounting
  • For EN 50 022/035/045 (TS 35/32/15) rails
  • Flame retardent material
  • Integral marker facility
  • Extruded Versions - Screw fitted end
    covers with extruded intermediate base section. Separate DIN-Rail foot element
  • With the extruded versions we can create a
    support to exactly match the length of your existing PCB.
  • Give us your PCB size and we will cut the
    base extrusion to suit
  • Modular Versions - Snap-together end covers with intermediate base sections. Both parts
    with/without DIN-Rail foot element
  • Simply combine the components to create a
    suitable length module for your PCB.
  Material:
  • Green PA 66 (UL 94 V-0)
  Accessories:
  • Foot element
  • Panel mounting elements
  Applications:
  • Automation. Building and safety technology. Heating and air conditioning systems. Especially for automatic timers, sensors, relays signal distribution etc.
Open Interface Supports
Extruded Interface Supports
Modular Interface Supports



 EXTRUDED INTERFACE SUPPORT - 72mm wide PCBs
End Cover
Extruded Base
Foot Element
 Assembly Screw
72mm Extruded Interface Supports

Part #
End Cover

Part #
Extruded Base
Section*
Part #
DIN-Rail
Foot Element
Part #
Assembly
Screw*
Dimensions in mm
PCB W
PCB L
Molding Size
W
L
H
CIME/M/EC
$
      
72
2
82.3
4
16
 
CIME/M/BExxx
    
72
Your PCB
size*
80.4
cut
to size*
27.5
   
CIME/M/FE
$
  
 See table below for how many foot elements to order
     
CIME/M/SCR
$
 Self tapping screw (four required per assembly)


 Dimensions:
Dimensions
  Ordering Notes:
 * Supply 1pc each
 * Minimum components for one support: 2 end covers, extruded base (cut to size), DIN-Rail foot element plus 4 assembly screws
 * Extruded Base Section - xxx = Your PCB length less 4mm (we will supply the base extrusion pre-cut to this dimension)
    e.g. 200mm PCB = base extrusion cut to 196mm - order Part # CIME/M/BE196
    Please note minimum length for extruded base section 100mm
 * Foot Element - suitable for EN 50 022 (TS 35)/ ...035 (TS 32)/ ...045 (TS 15) rails.
 * See table below for the number of foot elements required for the PCB length

PCB Length
Foot Elements
PCB Length
Foot Elements
100-150mm
2
501-750mm
5
151-300mm
3
751-999mm
6
301-500mm
4
    



 EXTRUDED INTERFACE SUPPORT - 107mm wide PCBs
End Cover
Extruded Base
Foot Element
 Assembly Screw
107mm Extruded Interface Support

Part #
End Cover

Part #
Extruded Base
Section*
Part #
DIN-Rail
Foot Element
Part #
Assembly
Screw*
Dimensions in mm
PCB W
PCB L
Molding Size
W
L
H
CIME/E/EC
$
      
107
2
118.2
3
17
 
CIME/E/BExxx
    
107
Your size
PCB*
117
cut
to size*
18
   
CIME/E/FE
$
  
 See table below for how many foot elements to order
     
CIME/M/SCR
$
 Self tapping screw (four required per assembly)


 Dimensions:
Dimensions
 Ordering Notes:
 * Supply 1pc each
 * Minimum components for one support: 2 end covers, extruded base (cut to size), DIN-Rail foot element plus 4 assembly screws
 * Extruded Base Section - xxx = Your PCB length less 4mm (we will supply the base extrusion pre-cut to this dimension)
    e.g. 200mm PCB = base extrusion cut to 196mm - order Part # CIME/E/BE196
    Please note minimum length for extruded base section 100mm
 * Foot Element - suitable for EN 50 022 (TS 35)/ ...035 (TS 32)/ ...045 (TS 15) rails.
 * See table below for the number of foot elements required for the PCB length

PCB Length
Foot Elements
PCB Length
Foot Elements
100-150mm
2
501-750mm
5
151-300mm
3
751-999mm
6
301-500mm
4
    


 

 MODULAR INTERFACE SUPPORT - 72 mm PCB
End Section
End Section with Foot
Intermediate Base
Snap-together Support - 72 mm PCB

Part #
End Cover

Part #
End Cover
with Foot*
Part #
Intermediate
Base
Dimensions in mm
PCB W
PCB L
Molding Size
W
L
H
B6720333
$
    
72
10
82
11.2
16
B6720334
$
    
72
21.25
82
22.2
16
 
B6720335
$
  
72
10
82
11.2
22.5
 
B6720336
$
  
72
21.25
82
22.2
22.5
   
B6720330
$
72
11.25
82
11.25
16
   
B6720331
$
72
22.5
82
22.5
16
   
B6720332
$
72
45
82
45
16


 Assembly Dimensions:
Assembly Dimensions
 Component Dimensions:
Component Dimensions
 Component Clearance:
 Each end cover has a 30 mm x 1.25 mm deep support on its inside wall and there is a 1 mm lip top and
 bottom on all elements. Solder side structures (cropped pins etc.) should be 3 mm clear of the top and
 bottom of the PCB to avoid the underside of the PCB slot

 Ordering Notes:
 Supply 1pc each
 Minimum components for one support: 2 end sections with/without foot.
 Combining these parts with intermediate base sections allows the nearest PCB length to be accomodated.

 The PCB widths are calculated by adding up the PCB L dimensions of the individual parts.
 * End section with foot - suitable for EN 50 022 (TS 35) rails.



 MODULAR INTERFACE SUPPORT - 107 mm PCB
End Cover
End Cover with Foot
Intermediate Base
 Intermediate Base with Foot
Snap-together Support - 107 mm PCB

Part #
End Cover

Part #
End Cover
with Foot*
Part #
Intermediate
Base
Part #
Intermediate
Base with Foot*
Dimensions in mm
PCB W
PCB L
Molding Size
W
L
H
B6720444
$
      
107
10
118
11.5
17.5
 
B6720445
$
    
107
10
118
11.5
27.5
   
B6720440
$
  
107
18.5
118
18.5
17.5
   
B6720441
$
  
107
35
118
35
17.5
     
B6720442
$
107
18.5
118
18.5
27.5
     
B6720443
$
107
35
118
35
27.5


 Dimensions:
Dimensions
 Component Clearance:
 Each base element has a 1.25 mm lip top and bottom. Solder side structures (cropped pins etc.)
 should be 4 mm clear of the top and bottom of the PCB to avoid the underside of the PCB slot

 Ordering Notes:
 Supply 1pc each
 Minimum components for one support: 2 end sections with/without foot.
 Combining these parts with intermediate base sections allows the nearest PCB length to be accomodated.

 The PCB widths are calculated by adding up the PCB L dimensions of the individual parts.
 * End cover with foot - suitable for EN 50 022 (TS 35) rails.
 * Intermediate part with foot - suitable for EN 50 022 (TS 35)/ ...035 (TS 32)/ ...045 (TS 15) rails.




 MODULAR SUPPORT - ACCESSORIES
insert
DIN-Rail Foot
Panel Mtg Element
Panel Mtg Element
 For RAILTEC SUPPORT (PCB L)..
 Description
Part #
DIN-Rail
Foot*
Part #
Panel Mtg
Element
Part #
 Panel Mtg
Element
 72  See notes*
B6720337
$
    
 72  Fits to end section
 For direct wall mounting 		 
B6820532
$
  
 107  Fits to end section
 For direct wall mounting		  
B6820542
$
  
 72  Fits to end section with foot
 For direct wall mounting		    
B6820533
$
 107  Fits to end section with foot
 For direct wall mounting		    
B6820543
$

 Ordering Notes:
 Supply 1 piece each
 * Foot - Can be used for intermediate part and end section with foot - suitable
 for EN 50 022 (TS 35)/ ...035 (TS 32)/ ...045 (TS 15) rails.



         
SITE LINKS
         
Tel: 866-603-7701  Last Updated: 13-Jul-2010 ©OKW Electronics. USA. All rights reserved.